These horizontal shaft Stationary Engines can be used as replacements on a wide variety of different applications such as; water pumps / go-karts / compressors etc.
The engine is fitted with a 2:1 reduction gearbox giving half speed of 1800rpm max.
It also has a 19mm shaft with key way, with a low oil shut off fitted as standard.
|Engine Type||Single cylinder, 4 Stroke, OHV|
|Bore & Stroke||68mm x 54mm|
|Maximum Power||6.5hp @ 3600 rpm|
|Starting Type||Recoil Pull Start|
|Shaft Diameter / Type||19mm / Key way|
|Fuel Tank Capacity||3.6L|
|Shaft Rotation||Anti-Clockwise from shaft side|
Oil: SAE-30 Grade, 4-Stroke Small Engine Oil. (Unit comes WITHOUT oil, this must be added before starting the engine. Please check levels before each use.)
Please Note: The reduction gearbox is also supplied without oil and requires oil before use, this is typically the same as you would use in the engine sump as described above.
Base footprint is the same as most Briggs & Stratton, Honda and other similar engines of this size.
Size: 44cm x 40cm x 38cm