These horizontal shaft Stationary Engines can be used as replacements on pumps / go karts / compressors etc.
Low oil shut off fitted as standard.
Has a fitted 2:1 reduction gearbox giving half speed of 1800rpm max.
Has a standard foot print as most Briggs and Stratton, Honda or most others on the market.
Has a 20mm shaft with key way
|Engine Type||Single cylinder, 4 Stroke, OHV|
|Bore & Stroke||68mm x 54mm|
|Maximum Power||6.5hp @ 3600 rpm|
|Starting Type||Electric Start with backup recoil pull start|
|Shaft Diameter / Type||20mm / Key way|
|Fuel Tank Capacity||3.6L|
|Shaft Rotation||Anti-Clockwise from shaft side|
|Distance: Shaft Center to Base||N/A|
|Distance: Shaft Center to Right Hand Side||N/A|
|Distance: Shaft Center to Left Hand Side||N/A|
|Overall Engine Dimensions||N/A|
Oil: SAE-30 grade, 4-Stroke Engine Oil. (Unit comes WITHOUT oil, this must be added before starting engine.)
Please Note: The reduction gearbox is also supplied without oil and requires oil before use, this is typically the same as you would use in the engine sump as described above.
Please Note: Battery not included.
Size: 43cm x 46cm x 38cm