Maxi-Pro 6.5hp Stationary Engine with 2:1 Reduction, Electric Start, Wet Clutch & 20mm Output Shaft

Quality 6.5hp Electric Start Stationary Engine with 2:1 reduction and built in clutch.

These horizontal shaft Stationary Engines can be used as replacements on pumps / go karts / compressors etc.

Low oil shut off fitted as standard.

Has a fitted 2:1 reduction gearbox giving half speed of 1800rpm max.

Has a standard foot print as most Briggs and Stratton, Honda or most others on the market.

Has a 20mm shaft with key way

Specifications:

Engine Type	Single cylinder, 4 Stroke, OHV
Displacement	196cc
Bore & Stroke	68mm x 54mm
Maximum Power	6.5hp @ 3600 rpm
Starting Type	Electric Start with backup recoil pull start
Shaft Diameter / Type	20mm / Keyway (5mm)
Shaft Length	50mm
Fuel Tank Capacity	3.6L
Oil Capacity	0.6L
Shaft Rotation	Anti-Clockwise from shaft side
Distance: Shaft Center to Base	N/A
Distance: Shaft Center to Right Hand Side	N/A
Distance: Shaft Center to Left Hand Side	N/A
Overall Engine Dimensions	N/A

Oil: SAE-30 grade, 4-Stroke Engine Oil. (Unit comes WITHOUT oil, this must be added before starting engine.)

Please Note: The reduction gearbox is also supplied without oil and requires oil before use, this is typically the same as you would use in the engine sump as described above.

CE approved

Please Note:  Battery not included.


Shipping info:
  Weight: 23kg
  Size: 43cm x 46cm x 38cm

  Cubic: 23kg